The AH3600CU000E features a USB 3.0 interface with 5 Gbps bandwidth and USB power, integrates a 256 MB onboard buffer and full ISP functions, supports multiple trigger modes, ROI, Binning, and advanced image controls, complies with USB3 Vision and GenICam standards, and meets CE, UKCA, UL, KC, and RoHS certifications, making it ideal for high-performance industrial imaging applications.
| AH3600CU000E | |
| Sensor | IMX178 |
| Image Sensor | 1/1.8″CMOS |
| Shutter | Rolling/GlobalResetRealease |
| Resolution | 3072 × 2048 |
| Frame Rate | 60 fps |
| Bit Depth | 12 |
| Mono/Color | Color |
| Pixel Size | 2.4 μm × 2.4 μm |
| Pixel | 6.0 MP |
| S/N Ratio | 41.4 dB |
| Dynamic Range | 71.7 dB |
| Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 |
| Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/ fourbytwo/fourbyfour/ThreebyThree |
| ROI | Support |
| X Flip | Support |
| Y Flip | Support |
| Gain | 1～32X |
| Gamma | From 0 to 3.99998, support LUT |
| Exposure Time | 25 μs ~ 2.5 sec |
| Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode |
| SPC | Support |
| User Setting | Support three sets of user-defined configurations |
| Image Buffer | 256MB |
| Port | USB 3.0 |
| GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output |
| Lens Mount | C-mount |
| Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V |
| Power Consumption | ≈2.7W(USB3.0 provide power supply) |
| Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) |
| Net Weight | Approx 85g |
| Storage Temperature | -30℃~+80℃ |
| Operating Temperature | 30℃~+50℃ |
